40kA Solar DC Surge Arrestor 500Vdc SPD 2Poles Surge Protective Device Surge Arrester
40kA Solar DC Surge Arrestor 500Vdc SPD Feature:
• BRPV surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system).
• SPD is designed to limit transient overvoltage of atmospheric origin and divert current waves to earth, so as to limit the amplitude of this overvoltage to a value that is not hazardous for the electrical installation and electric switch gear, control gear and etc.
• These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection.
• DC surge protection device is protect against DC power line system and other equipment from over voltage and instantaneous over voltage damage.
• Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.
• Widely used in Photovoltaic combiner box, power inverter, DC distribution cabinet etc.
• High energy MOVs equipped with specific thermal disconnector and related failure indicators.
40kA Solar DC Surge Arrestor 500Vdc SPD Product detail:
| 2 Mod | BRPV2-500 |
| SPD classification according to EN61643-31 | Type 2 |
| SPD classification according to IEC61643-31 | Class II |
| Max. continuous operating dc voltage Ucpv | 500V |
| Nominal discharge current (8/20us) In | 20kA |
| Max. discharge current (8/20us) Imax | 40kA |
| Voltage protection level [(DC+/DC-)→PE] Up | ≤2.0kV |
| Response time tA | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ |
| Operating state / fault indication | green / red |
| Cross-section area (Min.) | 4mm2 |
| Cross-section area (Max.) | 35mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermoplastic UL94-V0 |
| Degree of protection | IP20 |
Dimension:
40kA Solar DC Surge Arrestor 500Vdc SPD Installation:
1. Do power off when connect surge protection device to system.
2. Ground wire should be as short, straight and thick as possible to reduce the influence of distributed inductance on lightning discharge.
3. No need special maintenance. When the surge protector fails, power off and change new surge protector module is fine.
40kA Solar DC Surge Arrestor 500Vdc SPD Advantage:
• No leakage.
• Failure status indicator.
• Convenient replacement.
• High discharge capacity.
• Fast clamp response, under 25ns.
• State-of-the-art surge protection technology.
Certificate:
Factory photos:
About Us:
Britec, a SPD manufacturer in China, which was founded in 2003. Main Products are AC surge arrester, PV (solar) surge protection, data surge protector, LED lightning protective device etc.
FAQ:
Q1. How about the warranty?
A: All products are Original new and have 2 years warranty.
Q2: What about the delivery time?
A: Normally 20 days after recieved the payment.
Q3: What about the shipment?
A: We can arrange shipment by DHL, FedEx, UPS, TNT, EMS with competitive price, of course, customers can also use their own freight forwarders.
Q4: How about the terms of payment?
A: We accept T/T, Paypal etc.
Product Tags:
|
|
40kA Solar DC Surge Arrester Protective Device 500Vdc SPD 2Poles Images
|
